Equipment

Equipment List

Thermo iCAP 6000 series Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES)

Thermo iCAP 6000 series Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES)

This instrument measures total elemental concentrations of most metals, including Na, K, Mg, Ca, Mn, Ni, etc., as well as S and P. The system is equipped with an autosampler for high throughput. A MARS 5 reaction system is available for microwave-assisted acid digestions of soil and plant samples.Analyses supported: B, Na, Mg, P, S, Al, Si, K, Ca, Cr, Mn, Fe, Co, Pb, and most other metals.Samples accepted: Water samples, aqueous extracts, acid digests. Please note that this lab does not analyze ...
Read More
Thermo FLASH 2000 model combustion Elemental Analyzer (EA)*

Thermo FLASH 2000 model combustion Elemental Analyzer (EA)*

This instrument measures total C (TC) and total N (TN) analysis of organic solids (soils, plants, etc.) It is equipped with an autosampler for samples packed into tin or silver capsules. Samples can be prepared via ball-mill grinding if they are not submitted finely-ground. Pre-analysis sample acidification is also available for TOC analysis of organic solids.Analyses supported: TC, TN, TOCSamples accepted: Finely-ground solids.Typical concentration range: 0.01 – 100 % C or N. Please ...
Read More
Westco Model 200 SmartChem Discrete Wet Chemistry Analyzer with autosampler

Westco Model 200 SmartChem Discrete Wet Chemistry Analyzer with autosampler

Capable of performing a variety of colorimetric analyses, including NH4-N, NO3-N, NO3/NO2, PO4-P, and Cl-, as well as Total Kjeldahl Nitrogen (TKN) and Total Phosphorous (TP).  Analyses supported: NH4-N, NO3-N, NO3/NO2, PO4-P, Cl-, TKN, TP. Others available, please inquire. Samples accepted: Water samples, aqueous extracts, acid digests. Typical concentration range: Varies depending on method. Please inquire with the lab for detection limits specific to your method.
Read More
Shimadzu TOC-V CHS/CSN Model Total Organic Carbon Analyzer with autosampler

Shimadzu TOC-V CHS/CSN Model Total Organic Carbon Analyzer with autosampler

This is a combustion-mode analyzer used for the analysis of total or dissolved organic carbon, non-purgeable organic carbon, inorganic carbon, and nitrogen in liquid samples. Available sample modes include: NPOC, TC, TIC, TOC (as TC-TIC), DC, DIC, DOC, TN, and DN.Analyses supported: NPOC, TC, TIC, TOC (as TC-TIC), DC, DIC, DOC, TN, DNSamples accepted: Water samples and aqueous extracts, including soil microbial biomass extracts.Typical concentration range: 1-100 ppm. Please inquire with the lab ...
Read More
Dionex Ion chromatography (IC) DX 600 system with 4mm AS9-HC analytical column and electrolytic suppressor

Dionex Ion chromatography (IC) DX 600 system with 4mm AS9-HC analytical column and electrolytic suppressor

Suitable for the analysis of anions Cl-, Br-, NO3-, NO2-, PO43-, and SO42- in water samples.  Equipped with an autosampler for rapid sample throughput.Analyses supported: Cl-, Br-, NO3-, NO2-, PO43-, and SO42-Samples accepted: Water samples filtered to 0.45 µm.Typical concentration range: 2 – 40 ppm.  Please inquire with the lab for detection limits specific to your method.
Read More
High-sensitivity Thermo Delta V Advantage Isotope Ratio Mass Spectrometer (IRMS) configured for δ13C, δ15N, δ2H, and δ18O analysis*

High-sensitivity Thermo Delta V Advantage Isotope Ratio Mass Spectrometer (IRMS) configured for δ13C, δ15N, δ2H, and δ18O analysis*

Interfaced to a Thermo FLASH 2000 HT Elemental Analyzer with combustion (for C, N) and high-temperature-conversion (for H, O) modes. The FLASH is equipped with an autosampler for solid and liquid samples.  This IRMS operates in continuous-flow mode.Analyses supported: δ13C, δ15N, δ2H, δ18OSamples accepted: Finely-ground solids (δ13C, δ15N, δ2H, and δ18O) and water samples (δ2H and δ18O only).Typical concentration range: 0.01 - ...
Read More
ThermoFinnigan Delta+ Advantage Isotope Ratio Mass Spectrometer (IRMS) configured for δ13C analysis*

ThermoFinnigan Delta+ Advantage Isotope Ratio Mass Spectrometer (IRMS) configured for δ13C analysis*

Interfaced to a Gas Bench for δ13C analysis of CO2 in gas samples. Also interfaced to an OI Aurora 1030W TOC analyzer operating in persulfate (wet chemical) oxidation mode. This allows for δ13C analysis of NPOC and TIC in water samples. This IRMS operates in continuous-flow mode.Analyses supported: δ13CSamples accepted: Gas samples in tedlar bags or vials (CO2 analysis only). Water samples for NPOC, TIC.Typical concentration range: Please Inquire.*NRAL accesses SIFER (Stable&nb...
Read More

Search Equipment by Name

Equipment list by category